OEM Carrier Condenser Fan Motor 1/4 HP 208-230V 1100 RPM for Model PH1RJA060000AAWA

This OEM condenser fan motor is the factory-specified replacement for the Carrier PH1RJA060000AAWA condensing unit. The condenser fan motor drives the outdoor fan blade to pull air across the condenser coil, rejecting heat and maintaining proper refrigerant pressure. When it fails, you'll typically see the outdoor unit running but not cooling, the compressor overheating and tripping on thermal protection, or the condenser fan blade sitting completely still. Left unaddressed, a failed fan motor leads to compressor damage — the most expensive repair in any system.

• Specs: 1/4 HP | 208-230V | 1100 RPM | 1.5 Amps | 60 Hz | Single Phase | Frame 48 | Shaft Diameter 0.5" | Counterclockwise Rotation (CWLE) | Vertical Mount
• OEM vs Generic: This is a genuine Carrier Factory Authorized Part manufactured to exact OEM tolerances for the PH1RJA060000AAWA. Generic aftermarket motors often deviate in shaft length, rotation, and thermal protection rating — risks that can damage your fan blade assembly or void equipment warranties.
• Install difficulty: 3/5 — Shut off all power at the disconnect and breaker before starting. Tools needed: 5/16" and 1/4" nut drivers, wire stripper, multimeter, and needle-nose pliers. Photograph all wiring connections before removal. Always replace the run capacitor at the same time — a weak capacitor is a leading cause of premature motor failure.
• Warranty: 1-year OEM factory warranty against defects. Ships same business day from our warehouse when ordered before 3 PM local time.

Compatibility: Designed for the Carrier PH1RJA060000AAWA condensing unit. OEM part number HC39GR234 (superseded by HC39GE238). Verify horsepower, voltage, RPM, and shaft rotation against your unit's data plate before ordering. Our HVAC parts specialists are available to confirm fitment — contact us before you order if you have any questions.