Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
OEM Carrier Heat Pump Dual 40+5 MFD Run Capacitor for PH1RJA036000AAWA
Carrier

OEM Carrier Heat Pump Dual 40+5 MFD Run Capacitor for PH1RJA036000AAWA

SKU: CARRIE-PH1RJA036000AAWA-CAPACITOR-P291-4053RS Brand: Carrier
Guaranteed to fit PH1RJA036000AAWA — or your money back. Terms

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

OEM Carrier Heat Pump Dual Run Capacitor for PH1RJA036000AAWA

The dual run capacitor in your Carrier PH1RJA036000AAWA heat pump stores and delivers the phase-shifted jolt of energy that keeps both the compressor and the condenser fan motor spinning efficiently. It is the single most common failure point in any outdoor unit. When it weakens or fails, you'll hear a loud hum from the condenser while the fan sits still, the compressor may try to start and trip the breaker, the unit blows warm air, or it clicks on and off repeatedly (short-cycling). A bulged or leaking top is a dead giveaway. This is a dual-rated round capacitor, typically 40/5 MFD at 440 VAC (a 440V cap also covers 370V applications), with a tight OEM tolerance of ±5%. The larger "HERM" terminal feeds the compressor and the "FAN" terminal feeds the condenser motor, with "C" as common. Always confirm the MFD and voltage stamped on your old cap before ordering. OEM matters enormously for capacitors. Cheap aftermarket units often run ±10–15% tolerance and lower-grade dielectric film. A cap that drifts even a few microfarads off spec under-energizes the compressor windings, causing them to draw excess current, overheat, and fail years early. Genuine Carrier-spec capacitors hold their rating across thousands of heat cycles. Install difficulty: 2 of 5. Tools: 1/4" nut driver, insulated screwdriver, needle-nose pliers, and a multimeter with capacitance mode. #1 safety warning: a capacitor holds a lethal charge even with power off — discharge it across the terminals with an insulated screwdriver (or a 20k-ohm resistor) before touching any lead. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PH1RJA036000AAWA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $99
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Capacitor fit my Carrier PH1RJA036000AAWA?
Yes. This is the factory-specified OEM capacitor for the Carrier PH1RJA036000AAWA. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the capacitor on my Carrier PH1RJA036000AAWA?
Difficulty: Easy (20–30 min)
Step 1: Turn off power at breaker. Step 2: Open condensing unit panel. Step 3: Photograph the old capacitor wiring (Common/Herm/Fan). Step 4: Discharge old capacitor with insulated screwdriver. Step 5: Disconnect and remove old capacitor. Step 6: Mount new capacitor, reconnect wires to matching terminals. Step 7: Close panel, restore power, test. Tools: screwdriver, needle-nose pliers.
My AC hums but won’t start. What part do I need?
An AC that hums but won’t start is the classic symptom of a failed capacitor. The capacitor provides the electrical boost to start the compressor. When it fails, you hear humming but the motor can’t overcome inertia. Other symptoms: fan spinning slowly, AC cycling on/off rapidly, or a visibly swollen capacitor. Fix: replace capacitor ($15–$80 DIY, 30 min).
Is this capacitor compatible with Bryant or Payne too?
Many Carrier parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my Carrier capacitor?
OEM strongly recommended. OEM capacitors have ±6% MFD tolerance vs aftermarket ±10%. The looser tolerance causes motor winding stress, higher temps, and shorter compressor life. Price difference is only $10–$20 — OEM is the clear value choice.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online