OEM Carrier Condenser Fan Motor 1/4 HP 460V — HC39GE468 for Model PH1REA090000AAWB

This is the factory-specified OEM condenser fan motor for the Carrier PH1REA090000AAWB packaged heat pump unit. The condenser fan motor drives the outdoor fan blade that pulls ambient air across the condenser coil, rejecting heat during the cooling cycle and enabling proper refrigerant condensation. When this motor fails, the condenser coil overheats, triggering high-pressure lockout, compressor damage, or a complete system shutdown. Common failure symptoms include the outdoor fan not spinning, the motor humming but not turning, or the unit shutting down on high-pressure fault shortly after startup.

• Specs: 1/4 HP | 460/400V | 60/50 Hz | 1100/900 RPM | 0.7 Amps | Single Phase | Frame 48Y (5-5/8" diameter) | 1.5" shaft | Closed enclosure | CW rotation (shaft-end view) | Replaces HC39GE468 & GE Genteq 5KCP39KFV110AS / 5KCP39MFS303BS
• OEM vs Generic: OEM motors are wound and balanced to exact factory tolerances for the PH1REA090000AAWB, ensuring correct airflow CFM, operating amperage, and bearing life. Generic motors often deviate in rotation direction, shaft length, or RPM, risking premature failure or voiding equipment warranties.
• Install Difficulty: 3/5 — Requires disconnecting 460V line voltage; always lock out/tag out power before starting. Tools needed: multimeter, 5/16" nut driver, wire stripper, and torque wrench. Verify fan blade pitch and balance before reinstalling. Strongly recommended: replace the dual-run capacitor at the same time — a worn capacitor is the #1 cause of premature motor failure.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Engineered as a direct OEM replacement for Carrier PH1REA090000AAWB packaged heat pump units. Cross-references OEM part numbers HC39GE468 and HC39GE468A. Verify voltage (460V), HP (1/4), and rotation direction on your unit's data plate before ordering. Need help confirming fitment? Our HVAC parts specialists are standing by — we verify fitment before you buy.