OEM Carrier Condenser Fan Motor 1/4 HP 460V 1100 RPM — HC39GE464 for Model PH1REA060000AAWB

This is the genuine OEM Carrier condenser fan motor (part number HC39GE464), factory-specified for the Carrier PH1REA060000AAWB heat pump. The condenser fan motor drives the outdoor fan blade to expel heat from the refrigerant through the condenser coil. When this motor fails, the outdoor fan stops spinning while the compressor continues to run — causing rapid high-pressure lockout, system short-cycling, and in severe cases, compressor damage from overheating. Common failure symptoms include a humming outdoor unit with no fan movement, intermittent fan shutoff on hot days, or a tripped high-pressure limit switch.

• Specs: 1/4 HP | 1100 RPM | 460–400 VAC | 0.80A | 60/50 Hz | 1-Phase | 48 Frame | 1/2" shaft diameter | 2.0" shaft length | Clockwise rotation (CW viewed from shaft end) | ~13 lbs
• OEM vs Generic: This is a genuine Carrier OEM motor engineered to factory tolerances for the PH1REA060000AAWB. Aftermarket motors frequently differ in shaft length, rotation direction, or winding class, leading to premature failure and voided equipment warranties. OEM fit means zero modification required.
• Install Difficulty: 3/5 — Disconnect power at the breaker and verify zero voltage before opening the unit. Tools needed: 5/16" and 1/4" nut drivers, wire stripper, multimeter, and a blade puller for fan blade removal. Always mark or photograph wiring and blade pitch before disassembly. Capacitor replacement is strongly recommended at the same time — a weak capacitor is a leading cause of early motor burnout.
• Warranty: 1-year OEM factory warranty. Ships same business day from our warehouse when ordered before cutoff.

Compatibility: Direct factory replacement for Carrier model PH1REA060000AAWB (5-ton heat pump). Always verify nameplate voltage (460V) and rotation direction before installation. If you are unsure of fit, our HVAC parts specialists confirm compatibility before every order — no guesswork required.