OEM Carrier Condenser Fan Motor 1/4 HP 460V 1100 RPM for Model PH1REA060000AAWA
This is the factory OEM condenser fan motor for the Carrier PH1REA060000AAWA packaged heat pump unit. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to reject heat during cooling mode and absorb it during heating mode. When this motor fails, the unit will typically overheat, trip the high-pressure limit, or shut down entirely — leaving you with no cooling or heating and potential compressor damage if left unaddressed.
-
Specs: 1/4 HP | 460/400 VAC | 1-Phase | 1100 RPM | 48Y Frame | 0.80 Amps | 60/50 Hz | Clockwise (CW) rotation | 1/2 in. diameter × 1-1/2 in. shaft | Sleeve bearing | Insulation Class B
-
OEM vs Generic: This is a genuine Carrier OEM motor (GE model 5KCP39HGS239S) engineered to exact factory tolerances for the PH1REA060000AAWA. Generic aftermarket motors often vary in shaft length, rotation direction, or RPM — causing fan blade clearance issues, vibration, or premature failure.
-
Install difficulty: 3/5 — Requires 460V lockout/tagout procedure before any work. Tools needed: multimeter, nut driver set, wire stripper, and a motor run capacitor (5 µF 370/440 VAC — sold separately). Always verify rotation direction and shaft orientation before powering up. Photograph all wiring before disconnecting.
-
Warranty: 1-year OEM factory warranty. In-stock units ship same business day from our warehouse.
Compatibility: Designed specifically for the Carrier PH1REA060000AAWA packaged heat pump unit. Also replaces superseded part number HC39GE464A. Verify voltage (460V), HP (1/4), and RPM (1100) against your unit's data plate before ordering. Not compatible with 208/230V systems. Questions about fitment? Our HVAC parts specialists confirm compatibility before you buy.