OEM Carrier Condenser Fan Motor 1/4 HP 460V 1100 RPM for Model PH1REA036000AAWB
This is the genuine OEM Carrier condenser fan motor (part number HC39GE464), factory-specified for the Carrier PH1REA036000AAWB packaged heat pump unit. The condenser fan motor drives the outdoor fan blade to pull air across the condenser coil, rejecting heat and maintaining proper system pressures. When this motor fails, symptoms include the outdoor unit running with no fan movement, the system overheating and tripping on high-pressure lockout, or the unit shutting down within minutes of startup due to elevated head pressure.
-
Specs: 1/4 HP | 460/400V | 1100 RPM (60Hz) / 900 RPM (50Hz) | 0.80A | 48 Frame | CW Rotation | 2.0" × 1/2" Shaft | Single Phase | GE Model 5KCP39HGS239S
-
OEM vs Generic: This is a genuine Carrier OEM motor engineered to exact factory tolerances for the PH1REA036000AAWB. Generic replacements may vary in rotation, shaft length, or mounting configuration — a mismatch can damage the fan blade or cause premature motor failure from vibration or electrical imbalance.
-
Install difficulty: 3/5 — Shut off all power and verify zero voltage before beginning. Tools needed: multimeter, 5/16" and 1/4" nut drivers, wire stripper, needle-nose pliers. Always photograph all wiring and the fan blade pitch angle before removal. It is strongly recommended to replace the run capacitor at the same time — a weak capacitor is a leading cause of motor burnout and can immediately damage a new motor.
-
Warranty: 1-year OEM Carrier factory warranty. Ships same business day from our warehouse.
Compatibility: Direct OEM replacement for Carrier PH1REA036000AAWB packaged heat pump units. Verify voltage (460V/1Ph/60Hz), HP, RPM, frame size, shaft diameter, and rotation direction on your unit's data plate before ordering. Cross-references: HC39GE464A. Our team is available to verify fitment before you order — reach out before adding to cart if you have any doubt.