OEM Carrier Condenser Fan Motor 1/4 HP 208-230V 1100 RPM for Model PH1PPB048000AAAA

This OEM condenser fan motor (part #HC39GR234) is the factory-specified replacement for the Carrier PH1PPB048000AAAA 4-ton packaged heat pump unit. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to reject heat and maintain proper system pressure. When it fails, you'll typically notice the outdoor unit running with no fan movement, the compressor short-cycling on high-pressure lockout, or the system shutting down entirely due to overheating. Left unaddressed, a failed condenser fan motor can cause compressor damage — making fast, correct replacement critical.

• Specs: 1/4 HP | 208-230V | Single Phase | 1100 RPM | 1.5 Amps | 60 Hz | Frame 48 | 0.5" shaft diameter | 1.5" shaft length | CWLE rotation | Vertical mount only
• OEM vs Generic: This is a genuine Carrier factory-authorized motor (GE/Genteq 5KCP39GGY910S) matched exactly to the PH1PPB048000AAAA's electrical and mechanical tolerances. Generic motors often deviate in RPM, rotation direction, or shaft dimensions, risking fan blade misalignment and premature failure.
• Install difficulty: 3/5 — Disconnect power at the breaker and capacitor before removing the motor. Tools needed: 5/16" and 3/8" nut drivers, wire stripper, multimeter, and a shaft key or puller for the fan blade. Always photograph all wiring connections before removal. Note: Replace the run capacitor at the same time — a degraded capacitor is the #1 cause of early motor re-failure.
• Warranty: 1-year OEM factory warranty. Ships same business day from our warehouse.

Compatibility: Direct OEM replacement for Carrier model PH1PPB048000AAAA packaged heat pump units. Verify the part number on your unit's data plate or existing motor label before ordering. Our HVAC parts specialists are available to confirm fitment — contact us before you order if you have any questions.