OEM Carrier Condenser Fan Motor 1/4 HP 1100 RPM 208/230V for Model PH1PPA036000AABA

This is the factory-specified OEM condenser fan motor for the Carrier PH1PPA036000AABA packaged heat pump unit. Part number HC39AE209 (GE Genteq 5KCP39FGR560S) drives the condenser fan blade to move air across the outdoor coil, rejecting heat in cooling mode and absorbing heat in heating mode. When this motor fails, symptoms include the outdoor unit overheating and tripping the high-pressure limit, the condenser fan blade not spinning while the compressor hums, or the unit short-cycling due to inadequate heat rejection. Do not delay replacement — running the compressor without proper airflow causes rapid compressor damage.

• Specs: 1/4 HP | 1100 RPM | 208/230V | 1 Phase | 60 Hz | 1.4 Amps | Rotation: CCW shaft end | 1/2" shaft | 48-frame | TEAO enclosure | Requires 5 MFD/370V run capacitor
• OEM vs Generic: This OEM HC39AE209 is manufactured to Carrier's exact tolerances for the PH1PPA036000AABA — correct RPM, rotation, and shaft dimensions guaranteed. Generic motors risk mismatched RPM or rotation direction, reducing airflow efficiency and voiding equipment warranties.
• Install difficulty: 3/5 — Disconnect power and verify zero voltage before proceeding. Tools needed: 1/4" and 5/16" nut drivers, needle-nose pliers, wire stripper, multimeter. Photograph all wiring connections and note fan blade pitch direction before removal. Always replace the run capacitor at the same time — a degraded capacitor is a leading cause of premature motor failure.
• Warranty: 1-year OEM manufacturer warranty. In-stock and ships same business day from our warehouse.

Compatibility: Engineered as a direct OEM replacement for Carrier model PH1PPA036000AABA packaged heat pump units. Always verify your unit's data plate matches the 208/230V, 1/4 HP, 1100 RPM, and CCW rotation spec before ordering. Our HVAC parts specialists are available to confirm fitment — contact us before you order.