OEM Carrier Condenser Fan Motor 1/4 HP 208-230V 1100 RPM for Model PH1PNB036000ABAA

This OEM condenser fan motor (part # HC39GR234) is the factory-specified replacement for the Carrier PH1PNB036000ABAA condensing unit. The condenser fan motor drives the outdoor fan blade that expels heat from the refrigerant coil. When this motor fails, the condenser unit will overheat, trip its high-pressure limit, or shut down entirely — leaving your system unable to cool. Common failure symptoms include a buzzing or humming outdoor unit with no fan movement, or a system that short-cycles and trips the breaker.

• Specs: 1/4 HP | 208-230V | 1100 RPM | 1.5 Amps | 60 Hz | Single Phase | Frame 48 | CWLE rotation | 0.5" shaft diameter | 1.5" shaft length | Totally enclosed
• OEM vs Generic: This is a genuine Carrier Factory Authorized Part (FAP), manufactured by GE/Genteq to exact OEM tolerances. Generic motors often deviate in rotation direction, shaft length, or thermal overload settings — risking early failure or compressor damage. Always verify rotation (CWLE) before installing any replacement.
• Install difficulty: 3/5 — Requires disconnecting line voltage at the disconnect box before work begins. Tools needed: multimeter, 5/16" and 3/8" nut drivers, needle-nose pliers, and wire nuts. Photograph all wiring and note the rotation direction of the existing motor before removal. It is strongly recommended to replace the run capacitor at the same time — a degraded capacitor is a leading cause of new motor failure.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Designed for the Carrier PH1PNB036000ABAA condensing unit. Cross-references GE/Genteq model 5KCP39GGY910S. Verify HP, voltage, RPM, and rotation direction on your unit's data plate before ordering. Our HVAC parts specialists are available to confirm fitment — contact us before you order.