OEM Carrier Condenser Fan Motor 1/4 HP 208-230V 1100 RPM for Model PH1PNB036000AAAA

This is the OEM factory-specified condenser fan motor (part number HC39GR234) for the Carrier PH1PNB036000AAAA split-system heat pump condenser. The condenser fan motor drives the outdoor fan blade to pull ambient air across the condenser coil, rejecting heat from the refrigerant. When this motor fails, the outdoor unit will overheat, trip the high-pressure limit switch, and shut down — leaving you with no cooling or heating. Common symptoms include the condenser fan not spinning, the unit running briefly then shutting off, or a buzzing sound from the outdoor cabinet with no fan movement.

• Specs: 1/4 HP | 208-230V | 1-Phase | 1100 RPM | 1.5A | Frame 48 | 0.5" Shaft Diameter | 1.5" Shaft Length | CWLE Rotation | Vertical Mount Only
• OEM vs Generic: This is the genuine Carrier/GE-Genteq OEM motor built to exact factory tolerances. Generic aftermarket motors often vary in shaft length, rotation direction, and thermal overload ratings — mismatches that can cause premature failure or require blade-pitch adjustment. OEM is the correct, plug-and-play choice.
• Install difficulty: 3/5 — Disconnect and lock out power before beginning. Tools needed: 5/16" and 3/8" nut drivers, adjustable wrench, multimeter, blade-pitch gauge. Photograph all wiring and blade orientation before removal. Always replace the run capacitor when replacing this motor — a degraded capacitor will shorten the new motor's life.
• Warranty: 1-year OEM factory warranty. In stock and ships same business day from our warehouse.

Compatibility: Direct OEM replacement for Carrier model PH1PNB036000AAAA condenser units. Cross-references GE/Genteq model 5KCP39GGY910S. Verify voltage, HP, RPM, and rotation direction on your unit's data plate before ordering. Our HVAC parts specialists are available to confirm fitment — contact us before you order if you have any questions.