OEM Carrier Condenser Fan Motor 1/8 HP 825 RPM 208-230V for Model PH1PNB024000AAAA

This is the genuine OEM factory-specified condenser fan motor (part number HC35GE235) for the Carrier PH1PNB024000AAAA heat pump. The condenser fan motor drives the outdoor unit's fan blade, pulling air across the condenser coil to reject heat and keep refrigerant pressures within operating range. When this motor fails, the outdoor fan stops spinning — leading to rapid high-pressure lockout, compressor overheating, and complete system shutdown. Common failure symptoms include a buzzing or humming outdoor unit with no fan movement, intermittent cooling followed by high-pressure trips, or a visibly seized or wobbling fan blade.

• Specs: 1/8 HP | 825 RPM | 208-230 VAC | 1-Phase | 60 Hz | 0.90 FLA | PSC (Permanent Split Capacitor) motor type | Clockwise rotation | Replaces GE/Genteq 5KCP39FFS244CS and HC35GE235A
• OEM vs Generic: This is a genuine Carrier factory-authorized OEM motor, manufactured to exact torque, rotation, and thermal protection specs for this unit. Aftermarket motors may vary in shaft diameter, mounting configuration, or RPM tolerance — risking blade imbalance, vibration damage, and voided equipment warranties.
• Install Difficulty: 3/5 — Requires disconnecting line voltage at the disconnect box before proceeding. Tools needed: nut driver set, wire stripper, multimeter, blade puller (recommended). Always photograph all wiring connections before removal. Note: It is strongly recommended to replace the run capacitor at the same time — a capacitor out of tolerance can cause the new motor to overheat and fail prematurely.
• Warranty: 1-year OEM manufacturer warranty. In stock and ships same business day from our warehouse when ordered before cutoff.

Compatibility: Direct OEM replacement for Carrier model PH1PNB024000AAAA. Always verify HP, RPM, voltage, rotation direction, and shaft diameter against your unit's data plate before ordering. Our team is available to confirm fitment — contact us before you order if you have any questions.