OEM Carrier Condenser Fan Motor 1/4 HP 460V for Model PH1PEB060000AAAA

This is the genuine OEM factory-authorized condenser fan motor for the Carrier PH1PEB060000AAAA packaged unit. The condenser fan motor drives the outdoor fan blade to pull air across the condenser coil, rejecting heat from the refrigerant and keeping your system running efficiently. When this motor fails, the condenser coil overheats, triggering high-pressure lockout — leaving you with a system that either shuts down on safety or blows warm air. Common failure signs include the outdoor fan not spinning, the motor humming without turning, or the unit tripping its high-pressure switch shortly after startup.

• Specs: 1/4 HP | 1100/900 RPM (60/50 Hz) | 460/400V | 0.70 Amps | Single Phase | 48Y Frame | 5-5/8" diameter | CW rotation (shaft down) | 1.5" shaft diameter | Replaces GE/Genteq 5KCP39KFV110AS
• OEM vs Generic: This Carrier Factory Authorized Part is engineered to exact OEM specifications — including motor length, shaft diameter, rotation, and mounting footprint — ensuring the fan blade sits at the precise position for optimal airflow and sound performance. Generic motors may differ in shaft length or rotation direction, causing blade positioning errors and increased vibration.
• Install difficulty: 3/5 — Requires disconnecting 460V power at the unit disconnect before service. Tools needed: 1/4" and 5/16" nut driver, multimeter, wire nuts or spade connectors. Photograph all wiring before disconnecting. The fan blade set screw must be properly torqued to avoid blade slippage. Recommend replacing the run capacitor at the same time.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Designed for the Carrier PH1PEB060000AAAA 5-ton packaged unit. Also cross-references to part numbers HC39GE468A, GE/Genteq 5KCP39KFV110AS, and 5KCP39MFS303BS. Always verify voltage (460V) and HP on your unit's data plate before ordering — this motor is for 460V commercial/light-commercial applications, not standard 208-230V residential units. Not sure this is the right part? Contact our HVAC specialists and we'll verify fitment before you order.