Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
OEM Carrier Defrost Control Board for Heat Pump PH16NA03600GBAAA
Carrier

OEM Carrier Defrost Control Board for Heat Pump PH16NA03600GBAAA

SKU: CARRIE-PH16NA03600GBAAA-CONTROL_BOARD-HK32EA003 Brand: Carrier
Guaranteed to fit PH16NA03600GBAAA — or your money back. Terms

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

OEM Carrier Defrost Control Board for Heat Pump PH16NA03600GBAAA

The defrost control board is the brain of your Carrier PH16NA03600GBAAA heat pump's outdoor section. It monitors the defrost thermostat and run time, switches the reversing valve, sequences the compressor and outdoor fan, and times the defrost cycle that clears frost from the coil in heating mode. When it fails you'll see erratic behavior — short-cycling, the outdoor fan running when it shouldn't, the system stuck in defrost (steaming and icing), no heat or no cool, or a completely dead condenser even though the contactor and capacitor test good. A board killed by a power surge or a fried relay is a frequent culprit behind intermittent operation. This OEM defrost control board carries the onboard relays that switch the compressor contactor, outdoor fan, and reversing valve solenoid, plus the defrost timing logic (typically a selectable 30/60/90-minute interval) and a 24V control-transformer interface. Always match the part number, relay configuration, and timer pin settings to the board you're replacing — Carrier used several revisions across the PH16 series. Control boards are surge-sensitive and revision-specific. A generic or wrong-revision board may use lower-rated relays that chatter or weld under the condenser's inductive load, mis-time the defrost cycle (icing the coil or wasting energy), or mis-wire the reversing valve so heating and cooling reverse. OEM boards are built to Carrier's exact relay ratings and timing curves so the defrost logic actually protects the compressor. Install difficulty: 3/5. Tools: 1/4" nut driver, multimeter, and a photo of every wire before removal. #1 safety warning: kill the breaker AND the disconnect before opening the control box — the board carries 240V line voltage, and capacitor discharge can both shock you and destroy the new board. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PH16NA03600GBAAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $99
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Control Board fit my Carrier Heat Pump PH16NA03600GBAAA?
Yes. This is the factory-specified OEM control board for the Carrier Heat Pump PH16NA03600GBAAA. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the control board on my Carrier Heat Pump PH16NA03600GBAAA?
Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.
My HVAC system is completely dead. What could be wrong?
Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.
Is this control board compatible with Bryant or Payne too?
Many Carrier parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my Carrier control board?
OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online