OEM Carrier Condenser Fan Motor 1/4 HP 208/230V 825 RPM for Model PH15NB06000GBAAA

This OEM condenser fan motor (part number HC39GE242, GE/Genteq model 5KCP39LFY534AS) is the factory-specified replacement for the Carrier PH15NB06000GBAAA heat pump condenser. The condenser fan motor drives the outdoor fan blade to pull air across the condenser coil, rejecting heat during cooling and absorbing heat during heating. When the motor fails, the condenser coil overheats, triggering high-pressure lockout — leaving you with no cooling or heating until it's replaced. Common failure symptoms include the outdoor unit running briefly before shutting off on high-pressure fault, a seized or sluggish fan blade, loud grinding or buzzing from the outdoor cabinet, or the motor running hot to the touch.

• Specs: 1/4 HP | 208/230V | 825 RPM | 1.20 Amp | 60 Hz | Single Phase | 48Y Frame | Clockwise rotation (shaft-end up) | GE/Genteq 5KCP39LFY534AS
• OEM vs Generic: This OEM motor is wound and balanced to Carrier's exact factory tolerances, ensuring correct airflow CFM, proper shaft alignment, and full-load amperage within spec. Generic motors may deviate in RPM or rotation direction, causing coil pressure faults or premature bearing failure.
• Install difficulty: 3/5 — Disconnect power at the disconnect box and verify voltage is zero before opening the cabinet. Tools needed: 1/4" and 5/16" nut drivers, wire stripper, multimeter, and a fan blade puller. Always photograph or label existing wiring before disconnecting. Note: it is strongly recommended to replace the run capacitor at the same time, as an out-of-tolerance capacitor is a leading cause of new motor failure.
• Warranty: 1-year OEM factory warranty against defects. Ships same business day from our warehouse — in stock and ready now.

Compatibility: Engineered for Carrier model PH15NB06000GBAAA heat pump condensers. Cross-references: HC39GE242A, HB39GQ232, HB38GE242. Verify HP, voltage, RPM, rotation, and shaft diameter against your unit's data plate before ordering. Our parts specialists are available to confirm fitment before you buy.