OEM Carrier Condenser Fan Motor for PH15NB02400GBAAA Heat Pump

The condenser fan motor pulls outdoor air across the coil of your Carrier PH15NB02400GBAAA heat pump so the system can reject heat in cooling and absorb it in heating. When the motor weakens or seizes, head pressure climbs and you will notice warm air from the registers, a compressor that trips on its overload, a loud hum from the outdoor unit with the fan not spinning (or spinning slowly), a hot motor housing, or breaker trips. A motor that only starts after a stick-push, or that runs noisily on worn bearings, is failing and should be replaced before it takes the compressor with it. Specs: This is an OEM-matched condenser fan motor specified for the correct horsepower, RPM, voltage (typically 208/230V), full-load amps, frame size, shaft diameter, and — critically — rotation direction for this cabinet. It pairs with a run capacitor of the rated MFD; replace the capacitor at the same time, since a weak cap is the most common reason a new motor runs hot or fails early. Why OEM: Airflow across the coil is engineered around this motor's exact CFM. A generic motor with the wrong HP, RPM, or rotation moves too little air, raises head pressure, and overheats the compressor windings; cheaper aftermarket motors also use lower-grade sleeve bearings that fail in a fraction of the time. OEM gives you the right airflow and a sealed ball-bearing build. Installation difficulty: 3 of 5. Tools: 1/4" and 5/16" nut drivers, Phillips screwdriver, multimeter, and a 7/16" wrench for the fan-blade set screw. #1 safety warning: kill the breaker and pull the disconnect, then discharge the run capacitor across its terminals with an insulated screwdriver before touching any wiring — stored charge can shock you even with the power off. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PH15NB02400GBAAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.