OEM Carrier Condenser Fan Motor 1/4 HP 825 RPM for Model PH15NA048000BAAA

This OEM-spec condenser fan motor (part HC39GE242) is the factory-authorized replacement for the Carrier PH15NA048000BAAA heat pump condenser unit. The condenser fan motor drives the outdoor fan blade, pulling air across the coil to reject heat during cooling and absorb heat during heating. When it fails, the outdoor unit will overheat and trip on high-pressure lockout, the compressor may shut down entirely, or you'll notice loud grinding or rattling from the outdoor cabinet before full failure. Left unaddressed, a failed fan motor leads to compressor damage — the most expensive repair on any system.

• Specs: 1/4 HP | 825 RPM | 208/230V | 1.20A | 60Hz | 1-Phase | 48Y Frame | CWLE rotation (shaft end) | GE/Genteq 5KCP39LFY534AS equivalent | Replaces HC39GE242 & HC39GE242A
• OEM vs Generic: This OEM-spec motor is wound to exact factory tolerances for shaft diameter, rotation direction, and thermal overload protection. Generic motors frequently deviate in RPM and rotation, risking blade damage or insufficient airflow across the condenser coil.
• Install Difficulty: 3/5 — Disconnect power at the breaker and verify zero voltage with a multimeter before opening the cabinet. Tools needed: 1/4" and 5/16" nut drivers, needle-nose pliers, wire stripper, multimeter. Photograph all wiring before disconnecting. Note: always inspect and replace the run capacitor at the same time — a worn capacitor is the leading cause of premature motor failure.
• Warranty: 1-year OEM-spec warranty. In-stock and ships same business day from our warehouse.

Compatibility: Engineered for the Carrier PH15NA048000BAAA heat pump condenser (4-ton, R-410A). Also replaces HC39GE242A and cross-references GE/Genteq model 5KCP39LFY534AS. Confirm HP, RPM, voltage, and rotation direction on your unit's data plate before ordering. Our team is available to verify fitment — just reach out before you buy.