OEM Carrier Condenser Fan Motor Replacement for PH15NA02400GBAAA

The condenser fan motor turns the outdoor fan blade that pulls air across the condenser coil, rejecting the heat your system absorbed from inside the home. When this motor weakens or fails, the symptoms are unmistakable: the outdoor unit hums but the fan blade sits still, the fan starts then stalls, or it spins slowly and runs hot to the touch. Because the coil can no longer shed heat, the compressor trips on its high-pressure or thermal overload, your registers blow warm air, and the breaker often kicks off a few minutes after the unit starts. A grinding or screeching bearing noise is the final warning before total failure. This is a PSC (permanent split capacitor) condenser fan motor matched to the Carrier PH15NA package-unit specification — typically 1/4 HP, 208/230V single-phase, running in the 825-1075 RPM range with a sealed bearing rated for continuous outdoor duty. It is driven by the unit's run capacitor, so confirm the microfarad rating along with HP, RPM, rotation direction, and shaft diameter against your original before installing. OEM matters here because the motor's HP, RPM, and capacitor pairing keep airflow and head pressure inside Carrier's design window. A generic motor with the wrong RPM or a mismatched capacitor moves too little air, drives up condensing temperature, and shortens compressor life — and its lighter windings and cheaper sleeve bearings fail years sooner in high-heat rooftop and ground-level service. Install difficulty: 3/5. Tools: 1/4" and 5/16" nut drivers, 5/16" socket for the blade set screw, multimeter, and gloves. Safety first: kill power at both the breaker and the outdoor disconnect, then discharge the run capacitor before touching any leads — it holds a dangerous charge even with power off. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PH15NA02400GBAAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.