OEM Carrier Condenser Fan Motor 1/5 HP 208-230V 1100 RPM for Model PH14NB03600GABAA

This OEM condenser fan motor (part number HB38GR219, superseded by HB38GQ230) is the factory-specified replacement for the Carrier PH14NB03600GABAA heat pump condenser unit. The condenser fan motor drives the outdoor fan blade, pulling air across the refrigerant coil to expel heat during cooling and absorb heat during heating. When this motor fails, the outdoor fan stops spinning — causing the compressor to overheat, triggering high-pressure lockout, and leaving you with no cooling or heating output. Common symptoms include the condenser fan not turning, the unit short-cycling, or a burning smell near the outdoor cabinet.

• Specs: 1/5 HP | 208-230V, 60Hz | 1100 RPM | Frame 48Y (5-5/8" diameter) | 1/2" x 2.75" shaft | Rotation: CCW (shaft up) | 3-wire PSC motor | Replaces HC37GE219, HC38GE219, HB38GQ230
• OEM vs Generic: This is a Factory Authorized Part engineered to exact Carrier specifications for optimal system efficiency and compressor protection. Generic aftermarket motors often vary in RPM tolerance and winding quality, which can cause premature bearing failure and reduce overall system lifespan.
• Install Difficulty: 3/5 — Requires disconnecting power at the breaker and discharging the run capacitor before beginning. Tools needed: 1/4" and 5/16" nut drivers, wire stripper, multimeter, and needle-nose pliers. Always photograph all wiring connections before removal. Note: Replace the run capacitor at the same time — a weak capacitor is the leading cause of premature motor failure.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Designed for the Carrier PH14NB03600GABAA heat pump condenser. Also cross-references Carrier, Bryant, and Payne units originally equipped with part numbers HC37GE219, HC37GE219A, HB38GQ230, or GE motor 5KCP39DGY543S. Always verify voltage, HP, and RPM on your unit's data plate before ordering. Our technical team is available to confirm fitment — contact us before you order.