OEM Carrier Condenser Fan Motor 1/4 HP 208-230V for Model PH13PR06000GAHAA

This OEM-spec condenser fan motor (part number HC39GE226) is the factory-matched replacement for the Carrier PH13PR06000GAHAA split-system air conditioner. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to reject heat from the refrigerant. When this motor fails, the condenser coil overheats, the compressor trips on high-pressure lockout, and the system stops cooling entirely — often within minutes of startup. You may also notice the outdoor fan not spinning while the compressor hums, or the unit shutting down repeatedly on a hot day.

• Specs: 1/4 HP | 208-230V | 1-Phase | 1100 RPM | Frame 48 | CW Rotation (shaft up) | 0.5" Diameter Shaft | Stud Mountable | Requires 10 MFD 370V Run Capacitor (sold separately)
• OEM vs Generic: OEM-spec motors are wound and balanced to factory tolerances, ensuring correct RPM under load and proper thermal protection ratings. Off-brand motors may run hotter, vibrate excessively, and fail prematurely — especially in high-ambient summer conditions.
• Install difficulty: 3/5 — Disconnect power at the breaker and verify zero voltage before opening the cabinet. Photograph all wiring and measure fan blade setpoint depth before removal. Tools needed: multimeter, 5/16" nut driver, 1/4" hex key, needle-nose pliers. Pro tip: replace the run capacitor at the same time — a weak capacitor is the leading cause of premature motor failure.
• Warranty: 1-year warranty. Orders placed before 3 PM ship same business day from our HVAC-dedicated warehouse.

Compatibility: Engineered as the direct replacement for Carrier model PH13PR06000GAHAA. Also replaces cross-reference part numbers HC39GE226A, HB39GQ230, and HB39GQ230A. Always verify HP, voltage, RPM, and rotation direction against your unit's data plate before ordering. Have a fitment question? Our HVAC parts specialists confirm compatibility before you buy — contact us today and ship today.