Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
OEM Carrier Defrost Control Board for PH13PR06000GAHAA Heat Pump
Carrier

OEM Carrier Defrost Control Board for PH13PR06000GAHAA Heat Pump

SKU: CARRIE-PH13PR06000GAHAA-CONTROL_BOARD-HK32EA007 Brand: Carrier
Guaranteed to fit — or your money back. Terms

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

OEM Carrier Defrost Control Board for PH13PR06000GAHAA Heat Pump

The defrost control board is the electronic brain of your Carrier PH13PR06000GAHAA heat pump's outdoor section. It coordinates the reversing valve, condenser fan, and compressor contactor while timing the defrost cycle from the coil sensor and defrost thermostat. When this board fails, the symptoms are hard to miss: the outdoor coil ices over in winter and never clears, the system short-cycles, the compressor or fan refuses to start, the reversing valve chatters, or the whole unit goes dead and ignores the thermostat even though the breaker is on and 24V is present. Carrier heat-pump boards integrate multiple relays — typically a compressor contactor relay, a defrost relay, and a fan relay — plus a 24VAC control circuit, selectable defrost-interval pins (30/60/90 minutes), and dedicated inputs for the defrost thermostat and pressure switches. This OEM board matches your unit's exact relay count, jumper layout, and firmware revision, so defrost logic and fault codes behave precisely as Carrier engineered them. OEM matters here more than almost any other part. Aftermarket boards often use lower-rated relays that pit and weld under the inductive load of a compressor contactor, and many ship with different default defrost timing that runs cycles too long or too short — wasting energy, frosting the coil, and stressing the compressor over time. A genuine board protects the most expensive component in the system. Install difficulty: 3/5. Tools: 1/4" nut driver, Phillips screwdriver, multimeter, needle-nose pliers, and labeled photos of every wire before you disconnect anything. #1 safety warning: kill the breaker and pull the disconnect at the outdoor unit before opening the control box — 240V line voltage and a charged run capacitor are both present. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PH13PR06000GAHAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $99
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Control Board fit my Carrier PH13PR06000GAHAA Heat Pump?
Yes. This is the factory-specified OEM control board for the Carrier PH13PR06000GAHAA Heat Pump. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the control board on my Carrier PH13PR06000GAHAA Heat Pump?
Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.
My HVAC system is completely dead. What could be wrong?
Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.
Is this control board compatible with Bryant or Payne too?
Many Carrier parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my Carrier control board?
OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online