OEM Carrier Condenser Fan Motor 1/4 HP 208-230V for Model PH13PR06000GADAA

This is a genuine OEM Carrier condenser fan motor — the factory-specified replacement for the Carrier PH13PR06000GADAA heat pump condensing unit. The condenser fan motor draws outdoor air across the condenser coils to expel heat absorbed from your home, and also helps cool the compressor. When this motor fails, the condenser fan blade stops spinning, causing rapid high-pressure lockout, compressor overheating, and total loss of cooling or heating capacity. Common symptoms include a humming sound with no fan movement, intermittent shutdowns on high-pressure fault, or a motor that spins only when manually started.

• Specs: 1/4 HP | 208-230V, 60 Hz, 1-Phase | 1100 RPM | Frame 48Y | CW rotation (lead end) | 1.40 Amp | Shaft: 1.5" extension | OEM Part Numbers: HC39GE237 (primary) / HC40GE232 (alternate)
• OEM vs Generic: This factory-authorized Carrier motor is wound and balanced to exact OEM tolerances, ensuring correct airflow CFM, proper amp draw, and full compatibility with the unit's control board. Aftermarket motors often deviate in RPM and frame geometry, risking premature bearing failure and voiding equipment warranties.
• Install Difficulty: 3/5 — Disconnect and lock out power before beginning. Tools needed: 5/16" and 3/8" nut drivers, needle-nose pliers, wire stripper, multimeter, and blade puller tool (recommended). Always photograph wiring and blade orientation before removal. Discharge any capacitor before touching terminals. A run capacitor (5 MFD / 370V) is also recommended for replacement at the same time.
• Warranty: 1-year OEM factory warranty. In-stock units ship same business day from our warehouse. Qualifies for free ground shipping.

Compatibility: Engineered as the direct OEM replacement for Carrier model PH13PR06000GADAA heat pump condensers. Also replaces superseded part numbers HC39GE237A, HC39GE236A, HC39GE234A, HC39GE232A, HC37GE232, HC39GE231, and GE/Genteq model 5KCP39EGS070S. Always verify HP, voltage, RPM, frame size, and rotation direction against your unit's data plate before ordering. Need fitment confirmation? Our HVAC parts specialists verify compatibility before you buy.