OEM Carrier Condenser Fan Motor Assembly for PH13PR060000AEAA

The condenser fan motor pulls air across the outdoor coil of your Carrier PH13PR060000AEAA packaged heat pump, rejecting heat in cooling mode and absorbing it in heating mode. When this motor begins to fail you'll notice loud humming or grinding from the outdoor unit, a fan blade that spins slowly or not at all, warm air from the registers, or the system short-cycling on its high-pressure switch as head pressure climbs. A motor that's hot to the touch or trips the breaker is on its last legs — and running the compressor without condenser airflow will quickly destroy it. This is a totally-enclosed condenser fan motor sized for the PH13PR platform, typically a 1/4 HP, 230V, single-phase PSC motor rated around 825 RPM, reversible rotation, with a matched run capacitor requirement. Confirm horsepower, voltage, RPM, rotation direction, and shaft diameter against your old motor's nameplate before ordering, and reuse or replace the run capacitor as needed. Why OEM matters here: the genuine Carrier motor is wound to the correct horsepower and RPM and is balanced for the factory fan blade, so it moves the designed CFM and runs cool. Generic motors often run at different speeds or torque curves, overheat, and burn out early — and a mismatched motor can overload the compressor by starving the condenser of airflow. Install difficulty: 3 of 5. Tools needed: 1/4-inch and 5/16-inch nut drivers, a Phillips screwdriver, an Allen wrench for the blade set-screw, and a multimeter. #1 safety warning: KILL THE BREAKER and discharge the run capacitor with an insulated resistor before touching any wiring — the capacitor stores a dangerous charge even after power is off. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PH13PR060000AEAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.