OEM Carrier Condenser Fan Motor 1/4 HP 208-230V 1100 RPM for Model PH13PR060000ACAA

This is the factory-specified OEM condenser fan motor for the Carrier PH13PR060000ACAA heat pump / split-system condenser. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to reject heat absorbed from your home. When this motor fails, the unit will overheat, trigger high-pressure lockout, or shut down entirely — often within minutes of startup. Common failure signs include a humming outdoor unit with no fan movement, intermittent cycling, or a tripped breaker on the outdoor disconnect.

• Specs: 1/4 HP | 208-230V, 1-Phase, 60Hz | 1100 RPM | 48Y Frame | CW Rotation (CWLE) | 1.40 Amp | Shaft: 1/2" diameter × 1.5" extension | Replaces OEM part numbers HC39GE237 and HC40GE232
• OEM vs Generic: This is a genuine Carrier/GE Genteq factory-authorized motor built to exact HP, RPM, and rotation tolerances. Aftermarket motors commonly run off-spec RPM and use substandard bearing grease, leading to premature failure and potential compressor damage from inadequate heat rejection.
• Install Difficulty: 3/5 — Disconnect power at the outdoor disconnect and confirm zero voltage with a multimeter before beginning. Tools needed: 1/4" and 5/16" nut drivers, needle-nose pliers, wire stripper, multimeter. Photograph all wiring connections and fan blade orientation before removal. A run capacitor (typically 5 MFD / 370V) is required and should be tested or replaced at the same time.
• Warranty: 1-year OEM factory warranty. In stock — ships same business day from our warehouse.

Compatibility: Engineered as the direct OEM replacement for Carrier model PH13PR060000ACAA condensing units. Also replaces cross-reference part numbers HC39GE237A, HC39GE236A, HC39GE234A, HC39GE232A, HC37GE232, HC39GE231, and GE Genteq 5KCP39EGS070S. Always verify HP, voltage, RPM, rotation, and frame size against the motor data plate before ordering. Our team is available to verify fitment — contact us before you buy.