OEM Carrier Condenser Fan Motor 1/4 HP 208-230V 1100 RPM for Model PH13PR060000AAAA

This is the factory OEM condenser fan motor for the Carrier PH13PR060000AAAA heat pump condensing unit, supplied under OEM part numbers HC39GE237 and HC40GE232. The condenser fan motor drives the outdoor fan blade, pulling ambient air across the condenser coil to expel heat absorbed from your home. When this motor fails, the system will overheat and trip the high-pressure limit switch — resulting in a no-cool or no-heat condition, intermittent short-cycling, or a locked-out unit. Replacing it with the correct OEM motor restores factory airflow balance and protects the compressor from thermal damage.

• Specs: 1/4 HP | 1100 RPM | 208-230V Single-Phase | Clockwise (CW) rotation | Factory-matched for Carrier PH13PR060000AAAA
• OEM vs Generic: This OEM motor is wound and balanced to factory tolerances, ensuring correct CFM airflow across the coil. Generic aftermarket motors frequently differ in rotation direction, shaft length, or RPM — causing premature compressor failure or voiding system warranty.
• Install Difficulty: 3/5 — Disconnect power at the disconnect box before beginning. Tools needed: multimeter, 5/16" and 3/8" nut drivers, wire cutters/strippers, and fan blade puller. Note wire color/terminal positions before disconnecting the old motor. Torque fan blade set screw to spec.
• Warranty: 1-year OEM manufacturer warranty. In-stock and ships same business day from our warehouse.

Compatibility: Directly fits Carrier model PH13PR060000AAAA heat pump condensers. HC40GE232 is the updated superseding part number for HC39GE237 — both are correct for this unit. Always verify HP, voltage, RPM, and rotation direction on your unit's data plate before ordering. Need fitment confirmation? Our HVAC parts specialists verify compatibility before you buy.