OEM Carrier Condenser Fan Motor 1/5 HP 825 RPM 208-230V for Model PH13PR04800GAEAA

This is the genuine OEM Carrier condenser fan motor (part numbers HC37GE210 and HC38GE231) factory-specified for the Carrier PH13PR04800GAEAA heat pump condenser unit. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to reject heat from the refrigerant circuit. When this motor fails, the compressor overheats and trips on high-pressure lockout — symptoms include the outdoor fan not spinning, the unit shutting off after a few minutes of operation, or a seized motor humming without rotation. Replacing it with the correct OEM part restores factory airflow, protects the compressor, and avoids repeat failures caused by undersized or out-of-tolerance aftermarket motors.

• Specs: 1/5 HP | 208-230V, 60 Hz, 1-Phase | 825 RPM | 0.95A Full-Load Amperage | Frame 48 | CWLE Rotation | 0.5" Diameter × 1.9" Shaft | Stud Mountable | Closed Enclosure
• Capacitor Required: This motor requires a 7.5 MFD 370V run capacitor — always replace the run capacitor at the same time as the motor. A capacitor out of tolerance can cause the new motor to overheat and fail prematurely.
• OEM vs Generic: Genuine Carrier OEM motors are wound and balanced to exact factory specifications for the PH13PR04800GAEAA platform, ensuring correct RPM, airflow, and thermal protection performance. Generic replacements may vary in shaft length, rotation direction, or amperage draw — risking compressor damage or voided equipment warranties.
• Install Difficulty: 3/5 — Disconnect power at the breaker and verify zero voltage before opening the unit. Tools needed: 5/16" and 3/8" nut drivers, wire stripper, multimeter, and needle-nose pliers. Photograph all wiring and fan blade orientation before disassembly. Note rotation direction (CWLE) before mounting. Torque blade set screw to spec.
• Warranty: 1-year OEM manufacturer warranty. In-stock units ship same business day from our warehouse.

Compatibility: Direct OEM replacement for Carrier PH13PR04800GAEAA R-410A heat pump condensers. Also replaces legacy part numbers HC37GE210A and HC37GE208A. Verify your data plate voltage, HP, and RPM before ordering. Our fitment team is available to confirm compatibility before you purchase — no guesswork, guaranteed correct part.