OEM Carrier Condenser Fan Motor 1/4 HP 1100 RPM 208-230V for Model PH13PR04800GAAAA

This genuine OEM Carrier condenser fan motor (part number HC39GE237, also cross-references as HC40GE232) is the factory-specified replacement for the Carrier PH13PR04800GAAAA heat pump condensing unit. The condenser fan motor drives the outdoor fan blade to pull air across the condenser coil, dissipating heat and keeping the compressor from overloading. When this motor fails, you'll notice the outdoor fan not spinning, the unit shutting down on high-pressure lockout, or the system blowing warm air while the compressor hums. Left unaddressed, a failed condenser fan motor can cause compressor burnout — the most expensive repair in any system.

• Specs: 1/4 HP | 208-230V, 1-Phase, 60 Hz | 1100 RPM | Frame 48Y | 5-5/8" diameter | 1.5" shaft | CW rotation (lead end) | 3-wire | Requires a separate 5 MFD / 370V run capacitor (sold separately)
• OEM vs Generic: This is a genuine Carrier factory-authorized motor built to exact design-life specifications. OEM motors preserve your system's SEER/EER efficiency rating, UL listing, and remaining equipment warranty. Generic motors are frequently wound to looser tolerances and may run hotter, shortening compressor life.
• Install difficulty: 3/5 — Shut off power at the disconnect and verify zero voltage with a multimeter before opening the cabinet. Tools needed: 1/4" and 5/16" nut drivers, needle-nose pliers, wire nuts or push-in connectors, and a multimeter. Photograph all wiring before disconnecting. Note fan blade pitch orientation before removing the blade from the old motor shaft.
• Warranty: 1-year OEM factory warranty. Ships same business day from our stocked warehouse.

Compatibility: Designed for the Carrier PH13PR04800GAAAA heat pump condensing unit. Also replaces OEM part numbers HC39GE237A, HC39GE236A, HC39GE234A, HC39GE232A, HC40GE232, HC37GE232, HC39GE231, and GE Genteq model 5KCP39EGS070S. Always verify horsepower, voltage, RPM, rotation, and shaft diameter against your unit's motor nameplate before ordering. Our parts specialists are available to confirm fitment — contact us before you order.