OEM Carrier Condenser Fan Motor 1/5 HP 825 RPM for Model PH13PR048000AEAA
This is the factory OEM condenser fan motor for the Carrier PH13PR048000AEAA heat pump / air conditioner, covering OEM part numbers HC37GE210 and HC38GE231. The condenser fan motor draws outdoor air across the condenser coil and over the compressor to reject heat from the refrigerant circuit. When this motor fails, the condenser loses airflow, refrigerant pressures climb, and the unit will short-cycle on high-pressure lockout or overheat the compressor — often showing up as a system that runs briefly then shuts down, or simply fails to start the outdoor fan at all.
-
Specs: 1/5 HP | 208-230V | 60 Hz | 825 RPM | Single-phase | 0.95–1.0A FLA | Frame 48 | CWLE rotation (shaft-up = CCW) | 0.5" shaft diameter | Closed enclosure | Requires 7.5 MFD 370V run capacitor (sold separately — strongly recommended to replace at the same time)
-
OEM vs Generic: OEM motors are wound and balanced to factory tolerances for the PH13PR048000AEAA platform, ensuring correct airflow CFM, amperage draw, and bearing life. Generic or aftermarket motors often deviate in rotation, shaft length, or mounting pattern, which can lead to vibration, premature bearing failure, or mismatched airflow across the coil.
-
Install difficulty: 3/5 — Shut off power at the disconnect box and verify zero voltage before opening the unit. Tools needed: multimeter, 1/4" and 5/16" nut drivers, wire stripper, needle-nose pliers. Photograph all wiring connections before disconnecting. Note rotation direction with shaft pointing up before installing fan blade. Always replace the run capacitor simultaneously to prevent premature motor failure from a weak or out-of-tolerance cap.
-
Warranty: 1-year OEM factory warranty against defects in materials and workmanship. Ships same business day from our warehouse when ordered before cutoff.
Compatibility: Direct OEM replacement for Carrier model PH13PR048000AEAA condensing / heat pump units. Replaces part numbers HC37GE210, HC37GE210A, HC37GE208A, HC38GE231, and GE equivalent 5KCP39GFS166S. Verify voltage, HP, RPM, and rotation on your unit's data plate before ordering. Our fitment team is available to confirm compatibility before you buy.