OEM Carrier 60VA Control Transformer HT01AW229 for Model PH13PB06000GAAAA

This is the factory OEM replacement control transformer for the Carrier PH13PB06000GAAAA heat pump system. The transformer steps down high-voltage power (115, 208, or 230V primary) to the 24V signal voltage that energizes the thermostat, contactor coil, and all low-voltage controls. When this part fails, the entire control circuit goes dead — the system will not respond to the thermostat, contactors will not pull in, and the unit will appear completely unresponsive. A shorted secondary, a blown fuse on the control board, or a burning smell from the electrical panel are all classic signs this transformer needs replacement.

• Specs: 60 VA rating | Primary voltage: 115 / 208 / 230 VAC | Secondary voltage: 24 VAC | Foot-mounted configuration | OEM Part Number: HT01AW229
• OEM vs Generic: This is a genuine Carrier Factory Authorized Part, manufactured to exact VA and voltage tolerance specs. Generic transformers often run undersized VA ratings, causing premature thermal cutout trips and repeated control board fuse failures.
• Install difficulty: 2/5 — Shut off all power at the disconnect and breaker before beginning. Tools needed: flathead and Phillips screwdrivers, needle-nose pliers, multimeter. Label and photograph all low-voltage wiring connections before disconnecting. Discharge any residual voltage and confirm 0V with a multimeter before handling terminals.
• Warranty: 1-year OEM factory warranty. Ships same business day from our warehouse when ordered before cutoff.

Compatibility: Engineered as the direct OEM replacement for Carrier model PH13PB06000GAAAA. Always verify your unit's data plate primary voltage (115V, 208V, or 230V) matches your supply voltage before installing. Our parts specialists are available to confirm fitment prior to ordering — no guesswork required.