OEM Carrier 60VA Control Transformer HT01AW229 for Model PH13NR06000GAHAA

This is the factory OEM replacement control transformer for the Carrier PH13NR06000GAHAA packaged heat pump unit. The transformer steps down the 115/208/230V line voltage to the 24V AC signal that powers your thermostat, control board, contactor coil, and every other low-voltage component in the system. When this part fails, the entire control circuit goes dark — thermostats become unresponsive, the unit won't energize, and no call for heating or cooling will be answered. A blown fuse on the secondary side is a common first indicator of transformer stress or failure.

• Specs: 60 VA rated | Primary voltage: 115 / 208 / 230 VAC | Secondary voltage: 24 VAC | Foot-mounted configuration | OEM part number: HT01AW229
• OEM vs Generic: This is a genuine Carrier Factory Authorized Part. OEM transformers are wound and tested to exact VA and voltage tolerances. Generic substitutes frequently run under-spec VA ratings, causing premature overload and secondary fuse failures — especially in multi-stage or zoned systems with higher 24V current draw.
• Install difficulty: 2/5 — Shut off all power to the unit at the disconnect and breaker before starting. Tools needed: flathead and Phillips screwdrivers, wire stripper, multimeter. Label and photograph all low-voltage wiring before disconnecting. Confirm primary tap selection (115V vs 208/230V) matches your supply voltage before energizing.
• Warranty: 1-year OEM manufacturer warranty. In stock and ships same business day from our warehouse.

Compatibility: Engineered as the direct OEM replacement for Carrier model PH13NR06000GAHAA. Always verify the VA rating and primary/secondary voltages on your unit's data plate before ordering. Our HVAC parts specialists are available to confirm fitment — contact us before you order if you have any questions.