Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
OEM Carrier Dual 45+5 MFD Run Capacitor for Heat Pump PH13NR06000GAEAA
Carrier

OEM Carrier Dual 45+5 MFD Run Capacitor for Heat Pump PH13NR06000GAEAA

SKU: CARRIE-PH13NR06000GAEAA-CAPACITOR-P291-8053RS Brand: Carrier
Guaranteed to fit PH13NR06000GAEAA — or your money back. Terms

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

OEM Carrier Dual Run Capacitor for Heat Pump PH13NR06000GAEAA

The run capacitor stores and releases electrical energy to give your Carrier PH13NR06000GAEAA heat pump's compressor and condenser fan motor the phase shift they need to start and run efficiently. A dual-round capacitor serves both motors at once. When it weakens or fails you'll hear the compressor or fan humming but not starting, see the outdoor fan struggling to spin up (sometimes a stick-spin starts it), notice hard-starting, breaker trips, warm air instead of cool, or a swollen, bulging capacitor top. A failed cap is the single most common no-cool service call. Specs: this is a dual run capacitor rated in microfarads (MFD/µF) — commonly a 35+5, 40+5, or 45+5 µF combination — at 370 or 440 VAC, 50/60 Hz, in a round can. OEM units hold a tight ±5% capacitance tolerance. Read the HERM (compressor), FAN, and C (common) terminals and the exact MFD/voltage printed on your old can before ordering. Why OEM matters: capacitance tolerance is everything here. Generic caps often run ±10–15%, and the wrong MFD delivered to the compressor stresses the start and run windings, drives up amp draw and heat, and shortens compressor life — the most expensive part in the system. OEM-grade caps also use higher-temperature, longer-life dielectric. Install difficulty: 2 of 5 (one of the easiest repairs). Tools: 1/4" nut driver, needle-nose pliers, insulated screwdriver, and a multimeter with a capacitance setting. THE #1 SAFETY RULE: capacitors hold a lethal charge even after power is off — kill the breaker and discharge the capacitor by shorting its terminals through a 20k-ohm resistor before touching them. Ships same business day from our stocked warehouse on orders before 3 PM CST. 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PH13NR06000GAEAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $99
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Capacitor fit my Carrier Heat Pump PH13NR06000GAEAA?
Yes. This is the factory-specified OEM capacitor for the Carrier Heat Pump PH13NR06000GAEAA. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the capacitor on my Carrier Heat Pump PH13NR06000GAEAA?
Difficulty: Easy (20–30 min)
Step 1: Turn off power at breaker. Step 2: Open condensing unit panel. Step 3: Photograph the old capacitor wiring (Common/Herm/Fan). Step 4: Discharge old capacitor with insulated screwdriver. Step 5: Disconnect and remove old capacitor. Step 6: Mount new capacitor, reconnect wires to matching terminals. Step 7: Close panel, restore power, test. Tools: screwdriver, needle-nose pliers.
My AC hums but won’t start. What part do I need?
An AC that hums but won’t start is the classic symptom of a failed capacitor. The capacitor provides the electrical boost to start the compressor. When it fails, you hear humming but the motor can’t overcome inertia. Other symptoms: fan spinning slowly, AC cycling on/off rapidly, or a visibly swollen capacitor. Fix: replace capacitor ($15–$80 DIY, 30 min).
Is this capacitor compatible with Bryant or Payne too?
Many Carrier parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my Carrier capacitor?
OEM strongly recommended. OEM capacitors have ±6% MFD tolerance vs aftermarket ±10%. The looser tolerance causes motor winding stress, higher temps, and shorter compressor life. Price difference is only $10–$20 — OEM is the clear value choice.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online