OEM Carrier Single-Pole Contactor for PH13NR060000ACAA Heat Pump

The contactor is the electrically operated switch that sends line voltage to your Carrier PH13NR060000ACAA heat pump's compressor and condenser fan motor every time the thermostat calls. When the 24V coil energizes, the contacts pull in and power the outdoor unit. When it fails — pitted, arced, or welded contacts — you'll notice the outdoor unit won't start, a loud chattering or humming buzz at the condenser, the fan spinning while the compressor stays silent, or a unit that won't shut off because the contacts have fused closed. This is a single-pole, 24VAC-coil definite-purpose contactor sized for the compressor and fan load of this 60,000 BTU (5-ton-class) unit, typically rated 30–40A FLA. Genuine silver-alloy contacts and a sealed coil resist the arc erosion that high compressor inrush current causes. OEM matters here because Carrier contactors use full-rated silver-cadmium contacts and a coil matched to the control circuit. Generic contactors often use undersized or thinly plated contacts that pit and arc faster under start-up inrush, causing voltage drop, chatter, and eventual weld-up that can lock the compressor on and cook the windings — the most expensive failure on the unit. Install difficulty: 2 of 5. Tools: 1/4" and 5/16" nut drivers, insulated screwdriver, multimeter, and a phone photo of the wiring before you disconnect anything. #1 safety warning: shut off the breaker and the outdoor disconnect, THEN discharge the run capacitor before touching any terminal — the capacitor holds a lethal charge even with power removed. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PH13NR060000ACAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.