OEM Carrier Condenser Fan Motor 1/4HP 230V for PH13NR036000AFAA

The condenser fan motor pulls air across the outdoor coil of your Carrier PH13NR036000AFAA, rejecting the heat the system removes from your home in cooling mode. When it weakens or fails, head pressure climbs fast: you'll hear the compressor straining or humming, the unit short-cycles on its high-pressure or thermal limit, the fan blade spins slowly, stalls, or won't turn at all, and warm air comes from the registers. A failing bearing often squeals or grinds, and a seized motor will trip the breaker. This is a 1/4 HP, 208/230V condenser fan motor, typically 825 RPM, reversible rotation, with a sealed ball or sleeve bearing and a matched run-capacitor requirement (check the MFD value stamped on your old cap). Shaft diameter, mounting, and HP must match the PH13NR fan blade so static pressure and amp draw stay within spec. Why OEM matters: generic motors are often re-rated optimistically and wound to wider tolerances. A motor that runs hotter or draws more amps than spec cooks its windings and the run capacitor, and the wrong RPM or rotation moves too little air, driving head pressure and compressor wear up. The OEM motor's verified HP, RPM, and bearing quality protect the compressor and extend service life. Install difficulty: 3 of 5. Tools: 1/4" and 5/16" nut drivers, Allen wrench for the blade set screw, multimeter, and fresh zip-ties. #1 safety warning: kill the disconnect and discharge the run capacitor with an insulated resistor before touching any leads — the cap holds a dangerous charge long after power is off. Note blade orientation before removal. Ships same business day from our stocked warehouse on orders before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PH13NR036000AFAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.