OEM Carrier Condenser Fan Motor Replacement for PH13NR036000ACAA

The condenser fan motor is the workhorse that spins the outdoor fan blade, pulling ambient air across the condenser coil so your system can reject the heat it absorbed indoors. On the PH13NR036000ACAA, this motor runs every minute the compressor is energized. When it begins to fail the symptoms are hard to miss: a loud humming or grinding from the outdoor unit, a blade that turns slowly or not at all, warm air at the supply registers, nuisance high-pressure trip-outs, and a compressor that overheats and short-cycles on its internal overload because the coil can no longer shed heat. A seized motor draws locked-rotor amps and will often pop the breaker outright. This is a permanently lubricated PSC (permanent split capacitor) motor, typically 1/4 HP, 208/230V, 825 RPM, reversible rotation, 48-frame with a 1/2" shaft, paired to a matched run capacitor (commonly 5 MFD/440V). Confirm horsepower, RPM, rotation, shaft diameter, and capacitor MFD against your old motor before installing. Genuine Carrier motors are wound and balanced for the factory blade pitch and matched to the unit's capacitor, so they run at design airflow and amperage. Universal replacements tend to run hotter, vibrate at the blade's resonant speed, and ship with a mismatched capacitor that pushes current out of spec — shortening bearing and winding life. The OEM motor is the only one guaranteed to match the original electrical load. Install difficulty: 3/5. Tools: 1/4" and 5/16" nut drivers, a multimeter, an 8" adjustable wrench, and a fan-blade puller. #1 safety warning: kill the breaker AND discharge the run capacitor through an insulated resistor before touching any wiring — a charged capacitor can deliver a dangerous shock even with power off. Ships same business day from our stocked warehouse on orders placed before 3 PM CST, backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PH13NR036000ACAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.