OEM Carrier Condenser Fan Motor for Heat Pump PH13NR02400GAHAA

The condenser fan motor pulls air across the outdoor coil so your Carrier heat pump can reject heat in cooling mode and absorb it in heating mode. Without adequate airflow, refrigerant pressures spike and the system loses capacity fast. When this motor fails, homeowners notice the outdoor fan not spinning while the compressor still hums, warm air from the supply registers, high-pressure trips and short-cycling, or a hot smell and tripped breaker. A motor that spins slowly, wobbles on worn bearings, or only starts with a push toward its blade is on its way out. This genuine OEM replacement matches the factory horsepower, speed, rotation, voltage, and shaft diameter for the PH13NR condenser — commonly a 1/4 HP, 825 RPM, 208/230V single-phase motor with the correct mounting pattern and capacitor requirement. Matching RPM and HP is critical: the blade pitch is engineered around this exact motor. Why OEM matters: generic "universal" motors often run a different RPM or torque curve, so they move the wrong CFM across the coil — quietly raising head pressure, cutting efficiency, and overheating the compressor over time. OEM bearings and windings are rated for continuous outdoor duty in this cabinet. Install difficulty: 3 of 5. Tools: 1/4" and 5/16" nut drivers, 5/16" or 7/16" wrench for the blade set-screw, and a multimeter. #1 safety warning: kill the 240V disconnect AND discharge the run capacitor with an insulated resistor before handling wiring — a charged capacitor can deliver a dangerous shock. Note the blade-to-grille spacing before removal so airflow stays correct. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PH13NR02400GAHAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.