OEM Carrier Definite Purpose Contactor for Heat Pump PH13NR02400GAFAA

The contactor is the line-voltage switch that powers your Carrier heat pump's compressor and outdoor fan on every cooling and heat-pump call. A 24V coil signal from the control board pulls the contacts closed, sending 240V to the outdoor unit; when the call ends, the contacts should open and de-energize the unit. Failing contactors announce themselves with a steady hum or rapid chatter at the condenser, a fan and compressor that won't start, occasional breaker trips, or — worse — a unit that never shuts off because the contacts have welded shut. Ants, wasps, and corrosion fouling the contacts are classic culprits. This genuine OEM definite-purpose contactor is spec-matched to the PH13NR02400GAFAA: correct 24V coil, HVAC-rated contact amperage (typically 30–40A), and pole layout, so it bolts onto the factory bracket and reuses your existing leads. Definite-purpose units are built for the high locked-rotor inrush of an air-conditioning compressor. Why OEM matters: cheap aftermarket contactors often use lighter silver-alloy contacts that pit, arc, and weld under repeated inrush far sooner than spec parts — a stuck-closed contactor runs the compressor with no thermostat control and can destroy it. OEM contact mass and coil pull-in are matched to your unit's draw. Install difficulty: 2 of 5. Tools: 1/4" and 5/16" nut drivers, an insulated screwdriver, and a multimeter to verify 24V coil continuity. #1 safety warning: turn OFF the 240V outdoor disconnect and the indoor breaker before touching wiring — line-side terminals remain energized even with the thermostat off. Snap a photo of the wiring first. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PH13NR02400GAFAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.