OEM Carrier Condenser Fan Motor HC37GE210 / HC38GE231 for Model PH13NR02400GACAA

This OEM condenser fan motor is the factory-specified replacement for the Carrier PH13NR02400GACAA split-system heat pump condenser. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to reject heat during cooling and absorb heat during heating. When this motor fails, the outdoor unit will overheat, trip the high-pressure limit, and shut down — leaving you with no cooling or heating and potential compressor damage if left unaddressed.

• Specs: OEM Part Numbers HC37GE210 / HC38GE231 | Factory-matched HP, RPM, rotation direction, and shaft diameter | 208–230V single-phase | Permanently split capacitor (PSC) motor design | Replaces both HC37GE210 and HC38GE231 for full model coverage
• OEM vs Generic: This OEM motor is wound and balanced to exact Carrier factory specifications, ensuring correct airflow CFM across the coil, proper amp draw, and a longer service life. Generic aftermarket motors frequently deviate in RPM and rotation, causing vibration, reduced efficiency, and premature bearing failure.
• Install Difficulty: 3/5 — Disconnect and lock out power before beginning. Tools needed: 5/16" and 3/8" nut drivers, wire stripper, multimeter, and fan blade puller (recommended). Always match wire colors and photograph the original wiring before disconnecting. Verify rotation direction (typically counterclockwise viewed from shaft end) before powering up.
• Warranty: 1-year OEM factory warranty against defects in materials and workmanship. Orders ship same business day from our stocked warehouse.

Compatibility: Engineered specifically for the Carrier PH13NR02400GACAA heat pump condenser. Always verify HP, RPM, voltage, and shaft diameter against your unit's data plate prior to ordering. Our HVAC parts specialists are available to confirm fitment — order with confidence and get back to comfort fast.