OEM Carrier Condenser Fan Motor 1/10 HP 208-230V for Model PH13NR024000AHAA

This OEM condenser fan motor (part #HC34GE239) is the factory-specified replacement for the Carrier PH13NR024000AHAA heat pump condenser unit. The condenser fan motor drives the outdoor fan blade to pull air across the condenser coil, dissipating heat and keeping the refrigerant cycle running efficiently. When this motor fails, you'll typically see the outdoor unit running with no fan movement, the system tripping on high-pressure lockout, or the compressor overheating and shutting down within minutes of startup.

• Specs: 1/10 HP | 208-230V | 60 Hz | 1100 RPM | 0.75 Amps | Single Phase | Closed Enclosure | CW Rotation | 0.5" Shaft Diameter | 1.5" Shaft Length | Frame 48 | Cross-ref: GE/Genteq K5CP39BGU634S
• OEM vs Generic: This is a genuine OEM Carrier motor wound and balanced to exact factory tolerances. Aftermarket motors frequently deviate in RPM, rotation direction, or shaft dimensions — any mismatch causes blade imbalance, vibration, and accelerated bearing wear. OEM is the safe choice for compressor protection.
• Install Difficulty: 3/5 — Requires disconnecting power and safely recovering refrigerant pressure is NOT needed for this repair, but capacitor discharge is mandatory. Tools needed: multimeter, 5/16" and 3/8" nut drivers, wire stripper, needle-nose pliers, and a blade puller. Always photograph the wiring harness and fan blade orientation before removal. Pro tip: replace the run capacitor at the same time — a weak capacitor is a leading cause of premature motor failure.
• Warranty: 1-year OEM factory warranty against defects. Ships same business day from our climate-controlled warehouse. Free shipping on orders over $99.

Compatibility: Direct OEM replacement for Carrier model PH13NR024000AHAA. Also fits select Bryant and Payne units sharing the HC34GE239 specification. Always verify voltage, HP, RPM, rotation, and shaft diameter against your unit's data plate before ordering. Our HVAC parts specialists are available to confirm fitment — contact us before you order if you have any questions.