OEM Carrier Condenser Fan Motor 1/10 HP 208-230V 1100 RPM for Model PH13NB03100GAAAA

This is the factory OEM condenser fan motor for the Carrier PH13NB03100GAAAA heat pump condenser unit, supplied under part number HC34GE239. The condenser fan motor drives the outdoor fan blade to exhaust heat from the refrigerant coil. When this motor fails, airflow across the condenser coil stops — causing the compressor to overheat, trip the high-pressure limit, and shut the system down. Common failure symptoms include the outdoor fan not spinning, the unit running briefly then locking out on a fault, or visible motor overheating and burning smell at the outdoor cabinet.

• Specs: 1/10 HP | 208-230V | 60 Hz | 0.75 Amps | 1100 RPM | Single Phase | Closed Enclosure | CW Rotation (shaft up) | 1.5" Shaft Length | 0.5" Shaft Diameter | Frame 48
• OEM vs Generic: This OEM Carrier motor is wound and balanced to exact factory specification, ensuring correct airflow, noise levels, and service life. Generic motors frequently deviate in RPM and amp draw, reducing system efficiency and risking compressor damage from inadequate condenser cooling.
• Install difficulty: 3/5 — Requires disconnecting 240V power at the disconnect box before opening the cabinet. Tools needed: 5/16" and 3/8" nut drivers, wire stripper, needle-nose pliers, and a multimeter to verify wiring. Photograph all wiring connections before removal. Pro tip: replace your run capacitor at the same time — a weak capacitor is the leading cause of premature motor failure.
• Warranty: 1-year OEM factory warranty. In stock — ships same business day from our warehouse.

Compatibility: Direct OEM replacement for Carrier model PH13NB03100GAAAA heat pump condensers. Cross-references include HC34GE239A. Verify HP, voltage, RPM, rotation, and shaft diameter against your unit's data plate before ordering. Not sure it fits? Our HVAC parts specialists verify fitment before you buy — contact us today and get your system cooling again fast.