OEM Carrier Condenser Fan Motor for PH13NB02400GAAAA Heat Pump

The condenser fan motor turns the outdoor fan blade that pulls air across the condenser coil, rejecting the heat your PH13NB02400GAAAA system collects from inside the home. It runs on every cooling call and during defrost in heat mode. As it fails you'll hear loud humming, buzzing, or grinding from the outdoor unit, see the blade spinning slowly or not turning at all, feel weak or warm air at the registers, or find the outdoor breaker tripping. A seized motor lets head pressure climb until the compressor trips on its internal overload and short-cycles — left unchecked that heat damages compressor windings, a far costlier repair than the motor itself. This is a PSC (permanent split capacitor) condenser fan motor, typically 1/4 HP, 208/230V single-phase, roughly 825–1075 RPM, totally enclosed for outdoor condenser-mount duty with sealed bearings. It is driven by a dedicated run capacitor (commonly around 5 MFD/370V); replace both together for the longest service life. Confirm HP, RPM, rotation (CW/CCW viewed from the shaft end), and shaft diameter against the old motor before installing. Genuine Carrier motors are wound and balanced to the unit's airflow and capacitor spec. Generic motors often ship with mismatched RPM or torque and lower-grade bearings that run hotter, vibrate, and shorten compressor life by disturbing condenser airflow. The right OEM motor keeps head pressure and amp draw exactly where Carrier designed them. Install difficulty: 3 of 5. Tools: 5/16" and 1/4" nut drivers, socket set, multimeter, and a fan blade puller. Safety: shut off the breaker and pull the outdoor disconnect, then discharge the run capacitor before touching any wiring. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PH13NB02400GAAAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.