OEM Carrier Condenser Fan Motor 1/4 HP 208-230V for Model PH13NA042000ABAA

This OEM condenser fan motor (part #HC39GE226) is the factory-specified replacement for the Carrier PH13NA042000ABAA split-system heat pump condenser. The condenser fan motor drives the outdoor fan blade, pulling ambient air across the condenser coil to reject heat and maintain proper refrigerant pressures. When this motor fails, the outdoor unit will either run without airflow — causing the compressor to overheat and trip on high-pressure lockout — or it will fail to start entirely, resulting in a no-cool or no-heat condition. Common failure symptoms include a humming sound with no fan blade movement, intermittent shutdowns on hot days, or a seized motor that is hot to the touch.

• Specs: 1/4 HP | 208-230V, 60Hz | 1100 RPM | Single-phase | Frame 48 | Clockwise rotation (shaft-up) | 0.5" diameter shaft | Stud mountable | Requires 10 MFD 370V run capacitor (sold separately)
• OEM vs Generic: OEM motors are wound and balanced to exact Carrier factory tolerances, ensuring correct airflow CFM and amperage draw. Generic motors frequently run off-spec RPM and can accelerate bearing wear, voiding compressor warranties.
• Install difficulty: 3/5 — Requires safely disconnecting and locking out power to the condenser unit, removing the fan blade (typically a 5/16" set screw), and transferring wiring. Tools needed: multimeter, 5/16" nut driver, adjustable wrench, capacitor discharge tool. Note: discharge the run capacitor before touching any wiring terminals.
• Warranty: 1-year OEM manufacturer warranty. In-stock orders ship same business day from our warehouse.

Compatibility: Engineered as the direct OEM replacement for Carrier model PH13NA042000ABAA and related Carrier/Bryant/Payne condensers specifying the HC39GE226 motor. Always verify voltage, HP, RPM, and rotation direction against your unit's data plate before ordering. Have a fitment question? Our HVAC parts specialists confirm compatibility before you buy — order with confidence.