OEM Carrier Condenser Fan Motor 1/12 HP 208-230V 1100 RPM for Model PH13NA018000ABAA

This OEM Carrier condenser fan motor (part# HC31GE234, superseded by HB32GR234) is the factory-specified replacement for the Carrier PH13NA018000ABAA heat pump condensing unit. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to reject heat. When it fails, you'll typically notice the outdoor unit running but with no fan movement, the system tripping on high-pressure lockout, or the compressor overheating and shutting down within minutes of startup.

• Specs: 1/12 HP | 208-230V, 60Hz, 1-Phase | 1100 RPM | 0.50 Amps | Counter-Clockwise Shaft-End (CWLE) Rotation | 1/2" Shaft Diameter | 48Y Frame | GE Cross-Ref: 5KCP39BGY539S
• OEM vs Generic: This is the factory-matched OEM motor built to exact Carrier tolerances for bearing load, thermal protection trip point, and rotation direction. Generic motors often deviate in RPM and rotation spec, risking blade clearance issues and premature bearing failure.
• Install Difficulty: 3/5 — Disconnect and lock out power before beginning. Tools needed: 1/4" and 5/16" nut drivers, adjustable wrench, blade pitch gauge (recommended), and multimeter to verify voltage before energizing. Always confirm CWLE rotation and re-set blade pitch to factory spec after reinstallation.
• Warranty: 1-year OEM factory warranty against defects. Orders placed before 3PM ship same business day from our climate-controlled warehouse.

Compatibility: Factory-matched for Carrier model PH13NA018000ABAA heat pump condensing units. Cross-references: HC31GE234A, GE 5KCP39BGY539S, ICP 1172706, ICP 1191326. Verify HP, RPM, rotation, and shaft diameter against your unit's data plate before ordering. Our fitment team is available to confirm compatibility before you buy.