Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
OEM Carrier Run Capacitor Replacement for PH12NA036000ACAA AC Unit
Carrier

OEM Carrier Run Capacitor Replacement for PH12NA036000ACAA AC Unit

SKU: CARRIE-PH12NA036000ACAA-CAPACITOR-P291-5073RS Brand: Carrier
Guaranteed to fit — or your money back. Terms

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

OEM Carrier Run Capacitor Replacement for PH12NA036000ACAA AC Unit

The run capacitor stores and releases electrical energy to start and steady the compressor and condenser fan motor in your Carrier PH12NA036000ACAA. It is a small, inexpensive part that the entire outdoor unit depends on. As a capacitor degrades, telltale symptoms appear: a humming or buzzing condenser that won't start, a fan that needs a manual push to begin spinning, warm air from the supply vents, repeated short-cycling, and a tripped breaker as the compressor draws heavy locked-rotor current trying to start without the boost it needs. A swollen or bulging capacitor top is a sure sign of failure. This genuine OEM dual-run capacitor matches the factory MFD (microfarad) and voltage ratings — typically a 370V or 440V dual-rated can with separate HERM and FAN terminals. OEM capacitors are held to a tight ±5% capacitance tolerance so each motor receives the exact torque Carrier engineered. Why OEM matters here: budget aftermarket capacitors often carry a loose ±10–15% tolerance and use thinner dielectric film. A capacitor that drifts below spec starves the compressor windings of starting torque, raising amp draw and winding temperature and quietly shortening the life of the most expensive component in your system. Spending a little on the right capacitor protects the compressor. Install difficulty: 2 of 5. Tools: 1/4" nut driver, insulated needle-nose pliers, and a multimeter to confirm the new MFD reading. #1 SAFETY WARNING: a capacitor holds a dangerous charge long after power is off. Shut off the disconnect AND discharge the capacitor across its terminals with an insulated screwdriver before touching any wire. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PH12NA036000ACAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $99
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Capacitor fit my Carrier PH12NA036000ACAA AC Unit?
Yes. This is the factory-specified OEM capacitor for the Carrier PH12NA036000ACAA AC Unit. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the capacitor on my Carrier PH12NA036000ACAA AC Unit?
Difficulty: Easy (20–30 min)
Step 1: Turn off power at breaker. Step 2: Open condensing unit panel. Step 3: Photograph the old capacitor wiring (Common/Herm/Fan). Step 4: Discharge old capacitor with insulated screwdriver. Step 5: Disconnect and remove old capacitor. Step 6: Mount new capacitor, reconnect wires to matching terminals. Step 7: Close panel, restore power, test. Tools: screwdriver, needle-nose pliers.
My AC hums but won’t start. What part do I need?
An AC that hums but won’t start is the classic symptom of a failed capacitor. The capacitor provides the electrical boost to start the compressor. When it fails, you hear humming but the motor can’t overcome inertia. Other symptoms: fan spinning slowly, AC cycling on/off rapidly, or a visibly swollen capacitor. Fix: replace capacitor ($15–$80 DIY, 30 min).
Is this capacitor compatible with Bryant or Payne too?
Many Carrier parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my Carrier capacitor?
OEM strongly recommended. OEM capacitors have ±6% MFD tolerance vs aftermarket ±10%. The looser tolerance causes motor winding stress, higher temps, and shorter compressor life. Price difference is only $10–$20 — OEM is the clear value choice.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online