OEM Carrier Condenser Fan Motor for PH12NA030000AGAA Heat Pump

The condenser fan motor pulls outdoor air across the coil of your Carrier PH12NA030000AGAA heat pump, rejecting heat in cooling mode and absorbing it in heating mode. When this motor fails, the compressor keeps running but heat has nowhere to go: you'll feel warm air from the registers, hear the compressor humming while the top fan sits still, watch the unit short-cycle on its high-pressure switch, or trip the breaker. A failing motor often spins slowly, wobbles on worn bearings, or runs hot enough to smell. This is a 1/4 HP, 825 RPM condenser fan motor wired for 208/230V single-phase operation, with reversible rotation and a bearing design matched to the PH12NA030000AGAA's airflow target. It pairs with the unit's run capacitor (check the microfarad rating printed on the motor label before ordering) and uses the OEM shaft diameter and mounting pattern so the existing fan blade and bracket bolt straight on. Why OEM matters here: a motor with the wrong HP, RPM, or rotation moves the wrong volume of air, raising head pressure and shortening compressor life. Cheap universal motors often run hotter, use lower-temperature insulation, and fail again within a year or two — and mismatched capacitor requirements can burn out both the motor and the cap. Install difficulty: 3 of 5. Tools: 1/4" and 5/16" nut drivers, an Allen wrench for the blade set screw, a multimeter, and a capacitor discharge tool. #1 safety warning: kill the breaker and pull the disconnect, then discharge the run capacitor across its terminals before touching any wiring — capacitors hold a lethal charge long after power is off. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PH12NA030000AGAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.