OEM Carrier Condenser Fan Motor 1/4 HP 208-230V for Model PH10PA060000ABAA

This is the genuine OEM replacement condenser fan motor for the Carrier PH10PA060000ABAA packaged heat pump unit, covering primary OEM part numbers HC39GE237 and HC40GE230. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coils to reject heat during cooling and absorb heat during the heating cycle. When this motor fails, symptoms include the outdoor unit running but with no fan rotation, the system short-cycling on high-pressure lockout, warm air from the supply registers, or a humming sound with no fan movement. Left unaddressed, a failed condenser fan motor will rapidly overheat the compressor and cause far more costly damage.

• Specs: 1/4 HP | 1100 RPM | 208-230V, 1-Phase, 60 Hz | 1.40 Full Load Amps | 48 Frame | CWLE (Clockwise Lead End) rotation | Factory-matched GE/Genteq construction
• OEM vs Generic: This factory-authorized OEM motor is wound and balanced to exact Carrier specifications, ensuring correct airflow CFM, bearing life, and electrical draw. Aftermarket motors often deviate in rotation direction, shaft diameter, or amp draw — risking capacitor mismatch, vibration damage to the fan blade, and voided equipment warranty.
• Install Difficulty: 3/5 — Disconnect power and lock out the unit before beginning. Tools needed: nut driver set, adjustable wrench, fan blade puller (highly recommended), multimeter, and needle-nose pliers. Photograph all wiring before disconnecting. Note: it is strongly recommended to replace the run capacitor at the same time, as an out-of-tolerance capacitor is a leading cause of premature motor failure.
• Warranty: 1-year OEM factory warranty. In stock and ships same business day from our warehouse.

Compatibility: Factory-specified for Carrier model PH10PA060000ABAA packaged heat pump units. This motor also crosses to superseded part numbers HC39GE237A, HC39GE236A, HC39GE234A, HC39GE232A, HC37GE232, HC39GE231, and 5KCP39FGS071S — verify rotation, HP, and voltage against your unit's data plate before ordering. Need fitment confirmed? Our HVAC parts specialists verify compatibility before you buy.