OEM Carrier Condenser Fan Motor 1/4 HP 208-230V 1100 RPM for Model PH10PA048000AAAA

This OEM condenser fan motor (part numbers HC39GE237 and HC40GE230) is the factory-specified replacement for the Carrier PH10PA048000AAAA heat pump. The condenser fan motor drives the outdoor fan blade, pulling ambient air across the condenser coil to reject heat absorbed from your home. When this motor fails, the condenser coil overheats, triggering the high-pressure or thermal cutout, causing the system to shut down entirely — often on the hottest or coldest days of the year.

• Specs: 1/4 HP | 208–230V AC | 1100 RPM | Single-phase | 60 Hz | 1.3 FLA | Clockwise rotation (viewed from shaft end) | CSA listed
• OEM vs Generic: OEM motors from Carrier's Replacement Components Division are wound and balanced to exact factory tolerances. Aftermarket motors frequently deviate in shaft diameter, rotation direction, or mounting bolt pattern — leading to vibration, premature failure, and voided equipment warranties.
• Install difficulty: 3/5 — Disconnect all power before starting. Tools needed: 5/16" and 3/8" nut drivers, wire stripper, multimeter, and a blade puller. Photograph all wiring connections before removing the old motor. Note shaft length and blade pitch to ensure proper reinstallation. Pro tip: Replace the run capacitor at the same time — a weak capacitor is the #1 cause of premature fan motor failure.
• Warranty: 1-year OEM factory warranty. Qualifies for same-day shipping when ordered before 3 PM local time.

Compatibility: Engineered for the Carrier PH10PA048000AAAA packaged heat pump. OEM part numbers HC39GE237 and HC40GE230 are both valid factory references for this unit — verify voltage and HP on your unit's data plate before ordering. Our fitment specialists are available to cross-reference your data plate if you have any doubt. Order before 3 PM and your motor ships today.