OEM Carrier Condenser Fan Motor 1/4 HP 208-230V 1100 RPM for Model PH10JA042000AGAA

This is a genuine OEM condenser fan motor factory-specified for the Carrier PH10JA042000AGAA heat pump. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to expel heat absorbed from inside your home. When this motor fails, the outdoor unit will run but quickly overheat, trip the high-pressure limit, and shut down — leaving your system in a no-cool or no-heat lockout. Common symptoms include a humming outdoor unit with a stationary fan blade, intermittent short-cycling, or complete system shutdown on hot days.

• Specs: 1/4 HP | 1100 RPM | 208-230V Single-Phase | Frame 48Y (5 5/8" diameter) | CW rotation (lead end) | 1.5" shaft | 3-wire | Factory ±3% tolerance
• OEM vs Generic: This is a genuine Carrier OEM motor (HC39GE237 / HC40GE232), built to exact factory specifications for the PH10JA042000AGAA. Generic aftermarket motors often deviate in rotation direction, shaft length, or RPM tolerance — causing premature bearing wear, fan blade imbalance, and compressor strain.
• Install Difficulty: 3/5 — Disconnect power at the breaker AND disconnect switch before beginning. Tools needed: 1/4" and 5/16" nut drivers, fan blade puller (highly recommended), needle-nose pliers, and a multimeter to verify voltage. Photograph all wiring connections before disconnecting. Blade pullers prevent shaft damage during removal — do not skip this step.
• Warranty: 1-year OEM factory warranty. Ships same business day from our warehouse when ordered before 3 PM local time.

Compatibility: Engineered as a direct OEM replacement for Carrier model PH10JA042000AGAA. Also supersedes part numbers HC39GE237A, HC39GE236A, HC39GE234A, HC39GE232A, HC37GE232, HC39GE231, and 5KCP39FGS071S. Always verify HP, voltage, RPM, and rotation direction on your unit's data plate before ordering. Our team is available to confirm fitment — contact us before you buy.