OEM Carrier Condenser Fan Motor 1/4 HP 208-230V 1100 RPM for Model PH10JA042000ABAA

This is the factory-specified OEM condenser fan motor for the Carrier PH10JA042000ABAA packaged unit, replacing part numbers HC39GE237 and HC40GE232. Manufactured by GE (Genteq) exclusively for Carrier, this motor drives the condenser fan blade to pull ambient air across the condenser coil and expel system heat to the outdoors. When it fails, the unit loses its primary heat-rejection path — symptoms include a system that runs but won't cool, a tripped high-pressure limit, overheating compressor, or a completely silent outdoor fan section. Prompt replacement prevents compressor damage, which is far more costly to repair.

• Specs: 1/4 HP | 208-230V, 1-Phase, 60 Hz | 1100 RPM | Frame 48Y | CW rotation (lead end) | 5-5/8" diameter | 1.5" shaft | 3-wire connection | Requires 5 MFD / 370V run capacitor (sold separately)
• OEM vs Generic: OEM motors from Carrier/GE Genteq are wound to exact factory tolerances for the PH10JA042000ABAA's load specs. Generic substitutes frequently run off-RPM and with looser amp draws, accelerating compressor wear and voiding equipment warranties.
• Install difficulty: 3/5 — Disconnect power and lock out the unit before beginning. Tools needed: 5/16" and 3/8" nut drivers, adjustable wrench, fan blade puller (highly recommended), multimeter, and wire nuts or spade connectors. Photograph all wiring before disconnection, confirm rotation direction before securing the fan blade, and verify run capacitor MFD rating matches nameplate.
• Warranty: 1-year OEM factory warranty. In stock and ships the same business day from our warehouse.

Compatibility: Direct OEM replacement for Carrier model PH10JA042000ABAA. Also cross-references HC39GE237A, HC39GE236A, HC39GE234A, HC39GE232A, HC37GE232, HC39GE231, and GE/Genteq 5KCP39EGS070S. Always verify HP, voltage, RPM, rotation, and frame size against your unit's motor nameplate before ordering. Our team is available to confirm fitment — just reach out before you order.