OEM Carrier Condenser Fan Motor 1/4 HP 208-230V 1100 RPM for Model PH10JA03600GAEAA

This is a genuine OEM Carrier condenser fan motor, the factory-specified replacement for the Carrier PH10JA03600GAEAA heat pump condenser unit. The condenser fan motor spins the outdoor fan blade, drawing ambient air across the condenser coil to reject heat absorbed from your home. When this motor fails, the outdoor unit will run with no fan movement, rapidly overheat, and trigger high-pressure lockout — or the fan may hum without starting, indicating winding or capacitor failure. Replacing it promptly prevents costly compressor damage.

• Specs: 1/4 HP | 208-230V, 1-Phase | 1100 RPM | Frame 48Y | 5-5/8" diameter | Clockwise (CW) rotation | 3-wire | Shaft: 1.5" extension | OEM part numbers: HC39GE237 / HC40GE232
• OEM vs Generic: This factory-authorized OEM motor is wound and balanced to exact Carrier tolerances. Generic aftermarket motors often vary in RPM and amperage draw, shortening bearing life and reducing system efficiency — OEM is the only choice for warranty-valid repairs.
• Install Difficulty: 3/5 — Disconnect all power before starting. Tools needed: 5/16" and 1/4" nut drivers, needle-nose pliers, fan blade puller (highly recommended), and a multimeter to verify run capacitor health. Photograph all wiring before disconnecting leads. Support the fan blade when unbolting the motor to avoid bending the blade.
• Warranty: 1-year OEM factory warranty. In stock and ships same business day from our warehouse. Includes spade connectors for straightforward wire reconnection.

Compatibility: Direct OEM replacement for Carrier model PH10JA03600GAEAA heat pump condensing units. Also supersedes part numbers HC39GE237A, HC39GE236A, HC39GE234A, HC39GE232A, HC37GE232, HC39GE231, and GE Genteq 5KCP39FGS071S. Always verify HP, voltage, RPM, and rotation direction on your unit's data plate before ordering. Our fitment team is available to confirm compatibility — contact us before you order.