OEM Carrier Condenser Fan Motor 1/4 HP 230V for Model PH10JA03600GADAA

This OEM condenser fan motor (part numbers HC39GE237 and HC40GE232) is the factory-specified replacement for the Carrier PH10JA03600GADAA heat pump / packaged unit. The condenser fan motor drives the outdoor fan blade to pull air across the condenser coil, rejecting heat and maintaining proper refrigerant pressures. When this motor fails, symptoms include the outdoor fan not spinning, the compressor overheating and tripping on high pressure, or the system shutting down entirely with little to no cooling or heating output. Don't let a failed fan motor cause compressor damage — replace it promptly with the correct OEM part.

• Specs: 1/4 HP | 208–230V | 60 Hz | 1-Phase | 1100 RPM | 48 Frame | Clockwise (CW) rotation viewed from shaft end | Factory-matched tolerances
• OEM vs Generic: This is a genuine Carrier OEM motor wound to exact factory specifications. Generic aftermarket motors often deviate in RPM, rotation direction, or frame dimensions, risking premature failure and voiding equipment warranties.
• Install difficulty: 3/5 — Disconnect and lock out power before beginning. Tools needed: nut driver set, wire stripper, multimeter, blade puller. Always photograph existing wiring and blade pitch angle before disassembly. Verify rotation direction before final startup.
• Warranty: 1-year OEM factory warranty. Ships same business day from our warehouse on all in-stock orders.

Compatibility: Engineered as the direct OEM replacement for Carrier model PH10JA03600GADAA. Cross-references OEM part numbers HC39GE237 and HC40GE232. Verify voltage, HP, RPM, and frame size against your unit's data plate before ordering. Our fitment team is available to confirm compatibility prior to purchase — order with confidence and get your system back up and running today.