Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
OEM Carrier 40+5 MFD Run Capacitor Replacement for PH10JA036000AJAA AC
Carrier

OEM Carrier 40+5 MFD Run Capacitor Replacement for PH10JA036000AJAA AC

SKU: CARRIE-PH10JA036000AJAA-CAPACITOR-P291-4553RS Brand: Carrier
Guaranteed to fit — or your money back. Terms

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

OEM Carrier Run Capacitor Replacement for PH10JA036000AJAA AC

The run capacitor stores and releases electrical energy to keep the compressor and condenser fan motor in your Carrier PH10JA036000AJAA running smoothly. It supplies the phase shift that gives single-phase motors their starting and running torque. When it weakens or fails, you'll notice the outdoor fan won't spin (or only starts if you nudge it), a compressor that hums but won't start and trips the breaker, warm air from the vents, or short-cycling. A bulged, domed, or leaking top on the old cap is a dead giveaway. A weak capacitor is the single most common cause of "outdoor unit hums but won't start." Dual-run capacitors are rated in microfarads (MFD/µF) — typically a HERM (compressor) and FAN value such as 45/5 or 40/5 MFD — at 370 or 440 VAC. Match BOTH MFD values and the voltage to your original exactly. OEM units hold a tight ±5% tolerance and a 440V rating for the longest life, even in 370V applications. Capacitance is critical here. Generic caps often carry a ±10% tolerance, so a labeled "45 MFD" part may actually deliver 40 or 50 MFD. The wrong MFD overheats and stresses the compressor and fan windings, shortens motor life, and causes nuisance breaker trips. OEM caps also use higher-temperature dielectric and hold their rated value far longer. Install difficulty: 2/5. Tools: 1/4" nut driver, insulated screwdriver, multimeter with a capacitance setting, needle-nose pliers. #1 safety warning: a capacitor stores a potentially lethal charge even with power off — kill the breaker, then DISCHARGE it across the terminals with an insulated screwdriver (or a 20k-ohm resistor) before touching. Photograph the wiring first. Ships same business day from our stocked warehouse on orders placed before 3 PM CST, backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PH10JA036000AJAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $99
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Capacitor fit my Carrier PH10JA036000AJAA AC?
Yes. This is the factory-specified OEM capacitor for the Carrier PH10JA036000AJAA AC. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the capacitor on my Carrier PH10JA036000AJAA AC?
Difficulty: Easy (20–30 min)
Step 1: Turn off power at breaker. Step 2: Open condensing unit panel. Step 3: Photograph the old capacitor wiring (Common/Herm/Fan). Step 4: Discharge old capacitor with insulated screwdriver. Step 5: Disconnect and remove old capacitor. Step 6: Mount new capacitor, reconnect wires to matching terminals. Step 7: Close panel, restore power, test. Tools: screwdriver, needle-nose pliers.
My AC hums but won’t start. What part do I need?
An AC that hums but won’t start is the classic symptom of a failed capacitor. The capacitor provides the electrical boost to start the compressor. When it fails, you hear humming but the motor can’t overcome inertia. Other symptoms: fan spinning slowly, AC cycling on/off rapidly, or a visibly swollen capacitor. Fix: replace capacitor ($15–$80 DIY, 30 min).
Is this capacitor compatible with Bryant or Payne too?
Many Carrier parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my Carrier capacitor?
OEM strongly recommended. OEM capacitors have ±6% MFD tolerance vs aftermarket ±10%. The looser tolerance causes motor winding stress, higher temps, and shorter compressor life. Price difference is only $10–$20 — OEM is the clear value choice.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online